How to control 2 gimbals independently on the DJI M300/M350

In this video, we'll demonstrate how to independently control two gimbals on the DJI M350. This technique is compatible with any combination of H20 and H30 series cameras.

To get started, you'll need two DJI controllers equipped with Pilot 2, two camera payloads, and of course a DJI M300/M350 drone. Here are the steps :



  1. Connect both payloads to the drone

2. Connect the 1st controller to the drone aircraft

3. Go to Remote Control Setting, and select Remote Control Channels. Assign the 1st controller to Controller A channel


4. Connect the 2nd controller to the drone aircraft

5. Go to Remote Control Setting, and select Remote Control Channels. Assign the 2nd controller to Controller B channel

6. From the 2nd controller, access a Point of View of the camera that is not being used by the 1st controller

7. Press the button on the top right to obtain control of the camera. the screen will display “Obtained control of current gimbal”

8. Now each controller will have control of one camera each, and the 1st controller will also be used to control the drone

Utilize V-Line Pro to extend the flight time of your drone and its payloads. You can also watch the demonstration on the video below. We’d love to hear your thoughts! Please share your feedback and pass it along to anyone who might find it helpful!

Previous
Previous

V-LINE PRO for DJI M350 SETUP GUIDE

Next
Next

Protecting VIP from high vantage threats with sentry mode